2026 Figure Dust Protection: What It Costs
A practical breakdown of 2026 figure dust protection, aimed at new collectors. No marketing language — just the specification, the construction and the display consequences.
Polystone Care in Three Rules
Support the base, never lift by the head or an arm, and never reach for a solvent when a stain appears. Polystone is brittle under point impact and slightly porous, so handling and cleaning decide how a piece looks in five years far more than the initial paint job does.
Dusting and Cleaning
Dust open shelving weekly, enclosed cases monthly, with a 2–3 cm soft brush working top-down so debris falls away rather than into panel gaps. For cleaning use lukewarm water with one drop of pH-neutral soap on a nearly dry microfibre, then buff dry. Compressed air drives grit into seams, so a brush is the safer tool.
Maintenance Calendar
- Weekly: dust open shelving top-down with a soft brush.
- Monthly: dust enclosed cases, check no piece rocks on its base.
- Quarterly: inspect seams under bright light for hairline cracks.
- Every 6 months: replace silica gel, rotate stored pieces back on display.
Carton Sizes That Fit
A 32 cm piece such as the ASH 1/4-scale polystone bust needs an inner carton near 40 × 30 × 30 cm and an outer near 50 × 40 × 40 cm. The 34 cm LIN YUANZHE 1/4-scale articulated bust with extended armour wants 42 × 32 × 32 cm inside and 52 × 42 × 42 cm outside, plus 4 cm per side if the panels are posed open rather than closed.
Two-Box Dimensions
| Piece | Inner carton | Outer carton |
|---|---|---|
| ASH 1/4-scale polystone bust | 40 × 30 × 30 cm | 50 × 40 × 40 cm |
| LIN YUANZHE 1/4-scale articulated bust | 42 × 32 × 32 cm | 52 × 42 × 42 cm |
If the specification is vague, treat that as the answer. Good manufacturers publish the detail because collectors ask for it.
