Review UV Protection for Figures: What It Costs
This is a working guide to review UV protection for figures for new collectors: what the terms mean in practice, where the money goes, and which details are worth paying attention to.
Polystone Care in Three Rules
Support the base, never lift by the head or an arm, and never reach for a solvent when a stain appears. Polystone is brittle under point impact and slightly porous, so handling and cleaning decide how a piece looks in five years far more than the initial paint job does.
Resale and Maintenance
Keep the certificate, carton, receipt and four-angle photos together. Inspect seams under bright light quarterly, and rotate stored pieces back onto display every six months so they are not forgotten in a cupboard, because forgotten pieces are the ones that surprise you with damage later.
Original Carton vs Generic Wrap
Moulded foam is cut to one silhouette and distributes shock across the whole casting. Generic bubble wrap concentrates force at the weakest point. If you still have the original carton, use it; otherwise reproduce the two-box method above rather than wrapping the piece in a single layer.
Storage vs Display Care
Out of rotation, use the original carton and moulded foam, or acid-free tissue with a silica gel sachet replaced every six months. Store upright when space allows, never stacked, and keep the certificate with the piece rather than filed away where it is separated from the number it proves.
Dusting and Cleaning
Dust open shelving weekly, enclosed cases monthly, with a 2–3 cm soft brush working top-down so debris falls away rather than into panel gaps. For cleaning use lukewarm water with one drop of pH-neutral soap on a nearly dry microfibre, then buff dry. Compressed air drives grit into seams, so a brush is the safer tool.
If the specification is vague, treat that as the answer. Good manufacturers publish the detail because collectors ask for it.